Description
Karo Builder Gel 7 30ml have a red peach color for modeling, building and strengthening nails. It has a medium consistency and self-leveling properties, which ensure comfortable work in both minimal and "no filling" techniques. The gel is harder than liquid gels, holds the arch well and is suitable. The low-acid safety formula helps reduce the risk discomfort during polymerization.
Features Karo builder Gel 7 :
- Harder than liquid gels;
- Self-leveling;
- Low-acid;
- Medium consistency;
- Good for filing, but can be built up using the "no filing" technique.
Recommendations for use
STRENGTHENING with Karo Builder Gel 7:
- Removal
- Do not file the shape of the nail or leave 2 mm long, which we will remove after leveling.
- With a 240-grit file, we file without strong pressure on the nail from above, lifting the scales of the nail plate, or use a buff of 100 grit.
- We are doing a manicure.
- If we work with removers, after working with them, we wash our hands with soap.
- Degrease the nail with PREP. We make two approaches. We use 4 napkins for this (1 napkin for 5 fingers). The first approach: wipe the surface of the nail. The second approach: we take an orange stick, put a napkin on it and wipe everything in the cuticle area and in the sinuses.
- Use the primer as desired, but if the base for the substrate has sufficient acidity, then it is not needed.
-
Rubber Base liner is best applied with a flat gel brush. Movements should be rubbing. Draw all the sinuses of the nail and dry in a lamp for 60 seconds.
- Wipe off the stickiness.
- Level it with gel, leaving a 0.5–1 mm gap from the cuticle. Dry in a UV/LED lamp for 60 seconds.
- Filing the nail to give it shape. It is necessary to form a thickness on the edge of the nail that will hold the free edge.
- If the nail was thin, it can curl, so be sure to file 1 mm of the natural nail from the inside. In this case, there will be no otsloek material. If the material is hard, and the nail is very soft, the nail itself will begin to separate from the hard material from the free edge.
- After, wipe off the stickiness and cover with gel polish.
- Apply Top coat . Curing with UV/LED 120 seconds. After drying, do not wipe with anything, otherwise the shine may be lost.
Extension with Karo builder gel 7:
- Removal
- Shorten the length of the nail to 1 mm and make a round shape.
- With a 240-grit file, we file without strong pressure on the nail from above, lifting the scales of the nail plate, or use a buff of 100 grit.
- We are doing a manicure.
If we work with removers, we wash our hands with soap after working with them.
-
Degrease the nail. We make two approaches. We use 4 napkins for this (1 napkin for 5 fingers). The first approach: wipe the surface of the nail. The second approach: we take an orange stick, put a napkin on it and wipe everything in the cuticle area and in the sinuses.
- Use the primer.
- Applied Rubber Base with a flat gel brush. Movements should be rubbing. Curing in the lamp UV/LED for 60 seconds.
- Remove stickiness.
- Apply nail form for extension of the free edge.
- Fill the nail form with clear gel for artificial nail. Cure for 30 seconds.
- File the free edge and shape as needed.
- Wipe off the tackiness and excess dust.
- Apply another layer of Rubber Base to areas that were filed. Cure for 30 seconds.
- Smooth out with gel, place in the lamp, and press for 10-15 seconds. If the gel is very tacky or contains glitter, press for 20 seconds.
- Cure in the UV/LED lamp for 120 seconds.
- Before applying gel polish, wipe off the tackiness.
- Apply Top coat and cure for 120 seconds. After curing, don’t wipe anything off, as it may dull the shine.
PROFMANICURE – your trusted distributor of KARO nail products across the EU. Fast delivery available to Germany, France, Austria, Italy, Romania, and more.
